NSU Spider - World Of Classic Cars - Rank 115

NSU Spider 1966

The NSU Spider was the first production car in the world to be powered by a Wankel rotary engine.
Apart from its water-cooled single rotor engine and standard front disc brakes, the car was in most respects unremarkable.
First appearing at the Frankfurt Motor Show in 1964, the Spider featured a two-door cabriolet body based on that of the NSU Sport Prinz coupé introduced back in 1959. In addition to the folding roof, the Spider was distinguishable from the hard top car by a grill at the front. As with all NSU cars at the time, the engine was rear-mounted: in order to improve weight distribution, space was found for the Spider’s radiator and for its 35-litre (9 US gal; 8 imp gal) fuel tank ahead of the driver. The front luggage locker was in consequence small. There was a second luggage area in the rear of the car above the engine. It appears that NSU Spiders were painted either red or white.

NSU Wankel Spider 1965

Invented by Felix Wankel, the Wankel engine differed from a piston engine because the quasi-oval design of the combustion chamber, containing a rotor that ascribed within the chamber an Epitrochoid shaped trajectory, enabling the combustion pressure to be converted directly into a rotary motion. There was no need to lose energy converting reciprocating movement into rotational movement. The result was a remarkably compact free-revving engine which, in the 1960s, was hailed by some as the next major step forward in automobile design. It was later found that the characteristics of critical materials selected and applied by NSU to build production rotary engines were inappropriate to the stresses they would bear, and rotary-engined cars earned a reputation for unreliability. Engines required frequent rebuilding to replace worn apex seals, and warranty costs associated with installation of the engine in NSU’s second Wankel-engined model destroyed the financial viability of NSU, forcing a merger with Audi in 1969. The only large scale automaker to persist with the rotary engine – and then only for niche models – was Mazda: piston engines continued to dominate the world’s automobile engine bays. These events were not foreseen during the Spider’s production period.

NSU Spider 1966

Claimed output was initially 50 bhp (37 kW) at 5500 rpm, though in later models 54 bhp (40 kW) at 6000 rpm was advertised.
The rotary engine was installed above the rear axle. It was compact, light and very free reving in comparison with conventional engines of the time. By ignoring the manufacturer's recommendations it was possible to rev the engine briefly above 7000 rpm in the lower gears and thereby to achieve a 0 – 100 km/h (0 – 62 mph) time of 14.5 seconds: other sources, presumably based on following the manufacturer's recommendations, give a time of 15.7 seconds.
Large sales volumes were never envisaged for the car, and this was reflected in a relatively high retail price, US$2,979. Between 1964 and 1967 2,375 were built. In 1967, the model was withdrawn and NSU's second rotary-engined production saloon was presented. The Ro 80 would notch up 37,398 units during its ten year production run.

NSU Wankel Spider 1965

In 1966 Al Auger of Richmond, California USA became the first person in the world to race a Wankel-powered production car in officially sanctioned races. With only installing a mandatory roll-bar and racing tires an NSU Spider raced in 1966 and 1967 in Sports Car Club of America sanctioned road races throughout California finishing second overall champion both years in Class H Modified. Because SCCA had no technical information about the Wankel engine it was placed in H Modified racing against lighter, more powerful 850 cc highly modified pure race cars.